Page 1 of 1

windows 10 ARM for raspberry pi 3

Posted: Mon Aug 03, 2020 12:16 am
by PNADATHUR
I was able to get the windows 10 arm for RPi3 deployment started using instructions from this you tube video:
How To Install Full Windows 10 On the Raspberry Pi 3 - 3 B+ Its Slow Laggy And AWESOME!

The installation ended with error code 2, could not find the BSP drivers.

I found this other video on you tube which I will be trying tomorrow. I did notice some download links from this video don't show up on the website
how to Install Windows 10 on Raspberry Pi 4 with USB support and 3GB ram. WOR part 12.

I was wondering if there is a better/more composite resource to complete the deployment of windows 10 arm on raspberry pi3?

Thanks,
Priya

Re: windows 10 ARM for raspberry pi 3

Posted: Mon Aug 03, 2020 8:21 pm
by PNADATHUR
I had the most luck following instructions on this you tube video:
How to install Windows 10 WoA (not iot) on raspberry pi 3 (Nova Spirit). The installation completed successfully. However there are no USB drivers. I downloaded a zipped driver file from git hub and even this did not have any USB drivers. When I tried to use the image from the SD card to boot the raspberry pi, keyboard commands were not registered. Can you provide any resources for this?

Thank you,
Priya

Re: windows 10 ARM for raspberry pi 3

Posted: Wed Aug 05, 2020 2:11 pm
by PNADATHUR
Here are logs from my install. They seem to indicate drivers are there and all went ok. But when I boot the RPi, I am unable to use the keyboard and mouse to proceed with the boot process. Any pointers on what went wrong? Thanks,
Priya

2020-08-03 14:13:06.1736 [info] Windows on Raspberry 64-bit (version 2.0.0-alpha.3)
2020-08-03 14:13:06.2492 [info] OS: Windows 10 Pro ver 1903 (18362.1.amd64fre.19h1_release.190318-1202)
2020-08-03 14:13:06.4666 [info] Loaded language: en-US
2020-08-03 14:13:06.5085 [info] Checking for updates...
2020-08-03 14:13:07.7906 [info] No updates found.
2020-08-03 14:13:10.1936 [info] Loading disks...
2020-08-03 14:13:10.2135 [info] Disk 1 - SDHC Card - Removable Media - 29 GB
2020-08-03 14:13:10.2135 [info] 1 disk(s) found
2020-08-03 14:13:11.4333 [info] Selected device: Raspberry Pi 3
2020-08-03 14:13:15.4051 [info] Loading disks...
2020-08-03 14:13:15.4211 [info] Disk 1 - SDHC Card - Removable Media - 29 GB
2020-08-03 14:13:15.4211 [info] 1 disk(s) found
2020-08-03 14:13:18.7397 [info] Selected disk: Disk 1 - SDHC Card - Removable Media - 29 GB
2020-08-03 14:13:37.8838 [info] Selected image (ISO): 17134.191.180713-1753.RS4_RELEASE_SVC_PROD2_CLIENTPRO_OEMRET_A64FRE_EN-US.ISO
2020-08-03 14:13:37.9526 [info] Mounting the ISO image...
2020-08-03 14:13:41.4085 [info] ISO file mounted on: D:\
2020-08-03 14:13:41.4085 [info] Found WIM image: D:\sources\install.wim
2020-08-03 14:13:41.4704 [info] Selected edition: Windows 10 Pro build 17134.191
2020-08-03 14:14:02.1831 [info] Selected drivers package: C:\Users\priya.nadathur\Downloads\RPi3_Windows_ARM64_Drivers_v0.1.zip
2020-08-03 14:14:02.1930 [debug] Extracting the package to: C:\Users\priya.nadathur\Downloads\WOR2.0alpha3\temp\drivers
2020-08-03 14:14:02.2768 [debug] The package has been extracted to: C:\Users\priya.nadathur\Downloads\WOR2.0alpha3\temp\drivers
2020-08-03 14:14:02.2768 [info] Validating drivers package...
2020-08-03 14:14:02.2768 [info] The selected drivers package is valid.
2020-08-03 14:14:12.3372 [info] UEFI package source: server
2020-08-03 14:14:12.3372 [info] UEFI package remote repository: worproject/RaspberryPiPkg
2020-08-03 14:14:12.3601 [debug] Verifying the local asset...
2020-08-03 14:14:12.3661 [debug] Local asset ID: "20538805"
2020-08-03 14:14:12.3791 [debug] Getting the latest release from "worproject/RaspberryPiPkg"
2020-08-03 14:14:12.7833 [debug] Release name: "v20.04.04", ID: "25202259"
2020-08-03 14:14:12.7833 [debug] Getting the latest asset from release "25202259"
2020-08-03 14:14:12.7833 [debug] Asset name: "RPI_EFI_v20.04.04.zip", ID: "20538805"
2020-08-03 14:14:12.7833 [debug] The local asset is up-to-date!
2020-08-03 14:14:36.6525 [info] The installation process has started!
2020-08-03 14:14:36.6595 [info] Formatting the target device...
2020-08-03 14:14:36.6595 [debug] Launch diskpart.exe with the following commands: select disk 1 , clean , exit
2020-08-03 14:14:39.8446 [debug] diskpart.exe process output:
Microsoft DiskPart version 10.0.18362.1

Copyright (C) Microsoft Corporation.
On computer: DEANOLIVER

DISKPART>
Disk 1 is now the selected disk.

DISKPART>
DiskPart succeeded in cleaning the disk.

DISKPART>
Leaving DiskPart...

2020-08-03 14:14:43.3513 [info] The target device has been erased!
2020-08-03 14:14:43.3513 [info] Allocated partition letters:
2020-08-03 14:14:43.3513 [info] Windows partition: K
2020-08-03 14:14:43.3622 [info] Boot partition: L
2020-08-03 14:14:43.3622 [info] Creating the partitions...
2020-08-03 14:14:43.3622 [debug] Launch diskpart.exe with the following commands: select disk 1 , convert mbr , create partition primary size=128 , format fs=fat32 quick label=BOOT , assign letter=L , active , create partition primary , format fs=ntfs quick label=Windows , assign letter=K , exit
2020-08-03 14:14:52.9811 [debug] diskpart.exe process output:
Microsoft DiskPart version 10.0.18362.1

Copyright (C) Microsoft Corporation.
On computer: DEANOLIVER

DISKPART>
Disk 1 is now the selected disk.

DISKPART>
DiskPart successfully converted the selected disk to MBR format.

DISKPART>
DiskPart succeeded in creating the specified partition.

DISKPART>

0 percent completed
0 percent completed
100 percent completed


DiskPart successfully formatted the volume.

DISKPART>
DiskPart successfully assigned the drive letter or mount point.

DISKPART>
DiskPart marked the current partition as active.

DISKPART>
DiskPart succeeded in creating the specified partition.

DISKPART>

0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
100 percent completed


DiskPart successfully formatted the volume.

DISKPART>
DiskPart successfully assigned the drive letter or mount point.

DISKPART>
Leaving DiskPart...

2020-08-03 14:14:52.9811 [info] The partitions have been created!
2020-08-03 14:14:52.9911 [info] Applying the WIM image to: K
2020-08-03 14:14:52.9911 [trace] Started wimlib
2020-08-03 14:51:12.1352 [trace] wimlib finished the task successfully!
2020-08-03 14:51:12.1352 [info] The image has been applied to: K
2020-08-03 14:51:12.1433 [info] Installing the drivers...
2020-08-03 14:51:29.2488 [info] The drivers have been installed!
2020-08-03 14:51:29.2538 [info] Installing the boot files on: L
2020-08-03 14:51:30.0230 [info] The boot files have been copied to: L
2020-08-03 14:51:30.0389 [info] Creating the BCD...
2020-08-03 14:51:30.0579 [debug] Launch bcdboot.exe with the following arguments: K:\Windows /s L: /f UEFI
2020-08-03 14:51:35.2802 [debug] bcdboot.exe process output: Boot files successfully created.

2020-08-03 14:51:35.2802 [info] The BCD has been created!
2020-08-03 14:51:35.2852 [info] Setting testsigning and nointegritychecks on...
2020-08-03 14:51:35.2852 [debug] Launch bcdedit.exe with the following arguments: /store L:\EFI\Microsoft\Boot\BCD /set {default} testsigning on
2020-08-03 14:51:35.6088 [debug] bcdedit.exe process output: The operation completed successfully.

2020-08-03 14:51:35.6188 [debug] Launch bcdedit.exe with the following arguments: /store L:\EFI\Microsoft\Boot\BCD /set {default} nointegritychecks on
2020-08-03 14:51:35.8871 [debug] bcdedit.exe process output: The operation completed successfully.

2020-08-03 14:51:35.8871 [info] testsigning and nointegritychecks have been enabled!
2020-08-03 14:51:35.8871 [info] Disabling the recovery environment...
2020-08-03 14:51:35.8951 [debug] Launch bcdedit.exe with the following arguments: /store L:\EFI\Microsoft\Boot\BCD /set {default} recoveryenabled no
2020-08-03 14:51:36.1545 [debug] bcdedit.exe process output: The operation completed successfully.

2020-08-03 14:51:36.1545 [info] The recovery environment has been disabled!
2020-08-03 14:51:36.1646 [info] The installation has been finished!
2020-08-03 14:51:36.1777 [info] Elapsed time: 00:36:59

Re: windows 10 ARM for raspberry pi 3

Posted: Wed Aug 05, 2020 5:24 pm
by PNADATHUR
this was a successful installation after all! I had to use a regular keyboard (not one from the pi kit) and hit esc soon enough.

Thanks,
Priya